Quickfilter QF4A512-PA Bedienungsanleitung PDF herunterladen

QF4A512-PA USER’S GUIDE

Programming Adapter User’s Guide

QF4A512 Programmable Signal Converter

Rev A5, Feb 09 www.quickfiltertech.com

1) Introduction

The Programming Adapter was designed to be added to the QF4A512’s Development board for the purpose of

programming bulk volumes 10,000 parts or less of EEPROM. Additional connectors can also be added to the

development board so that parts can also be tested, programs checked etc in the lab and manufacturing floor.

(Note make sure you have downloaded QF software version 4.0.0 Build 0016 or later from our website)

The User’s Guide for the Programming Adapter board describes the following:

• Board Layout definition.

• Powering the Programming Adapter Board.

• Plugging in the Programming Adapter Board.

• Programming example sequence.

• Auto Configure and Auto Start options addressed.

• Using an external clock source.

• Schematics.

• Silk Screen for component reference.

2) Board Layout / Prototyping area definition:

The QF4A512 – PA board was designed to be plugged into the QF4A512 development board. See Figure 1 below for

a visual definition of the board.

DC Jack +5V to +12V 2.1mm Tip

positive, not needed if socket

added to development board

Push down on both sides

of socket to change parts

Socket power switch,

switch off when

changing parts

Connects signals

from the development

board J5 to PA board

If installed, connects

Power from the

development board to

the PA board

If installed, connects

signals from the BNC

connectors on the Dev

Board to PA Board

1 2 3 4 5 6 7 8 9

QF4A512-PA USER’S GUIDE 1

Inhaltsverzeichnis

Seite 1 - QF4A512-PA USER’S GUIDE

QF4A512-PA USER’S GUIDE Programming Adapter User’s Guide QF4A512 Programmable Signal Converter Rev A5, Feb 09 www.quickfiltertech.com

Seite 2

Programming Adapter User’s Guide QF4A512-PA Rev A5, Feb 09 2 www.quickfiltertech.com Figure 1 3) Powering the Programming Adapter Board: The

Seite 3

Programming Adapter User’s Guide QF4A512-PA Rev A5, Feb 09 3 www.quickfiltertech.com 4) Plugging in the adapter board: See figure 3 for alig

Seite 4

Programming Adapter User’s Guide QF4A512-PA Rev A5, Feb 09 4 www.quickfiltertech.com Step 2: Make sure the power to the socket is “off” this

Seite 5

Programming Adapter User’s Guide QF4A512-PA Rev A5, Feb 09 5 www.quickfiltertech.com Step 5: Run Quickfilter software QFPro version 4.0 Build

Seite 6

Programming Adapter User’s Guide QF4A512-PA Rev A5, Feb 09 6 www.quickfiltertech.com Step 10: Click the Copy data from RAM to EEPROM labeled

Seite 7

Programming Adapter Kit User’s Guide QF4A512-PA Rev A4, Feb 09 7 www.quickfiltertech.com Designer’s note – The allowable input range is 5 MHz t

Seite 8

Programming Adapter Kit User’s Guide QF4A512-PA Rev A5, Feb 09 8 www.quickfiltertech.com C690.1uF0603U8TPS79418DGNT12345678VOUTNCFBBYPGNDENNCV

Seite 9

Programming Adapter Kit User’s Guide QF4A512-PA Rev A5, Feb 09 9 www.quickfiltertech.com Contact Information: Quickfilter Technologies, Inc.

Weitere Dokumente für Nein Quickfilter QF4A512-PA

Um das Dokument anzuzeigen Quickfilter QF4A512-PA Spezifikationen

Quickfilter QF4A512-PA Spezifikationen (67 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Quickfilter QF4A512-PA Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Nein Quickfilter QF4A512-PA herunter. QF4A512-PA Users Guide - Quickfilter|Technologies Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Nein Quickfilter QF4A512-PA

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Quickfilter QF4A512-PA